The cleanliness of the bearing has a considerable impact on the bearing life, the higher the cleanliness of the bearing, the longer the life, and the lubricating oil with different cleanliness has a great impact on the life of the ball bearing. Therefore, improving the cleanliness of lubricating oil

There is a tolerance fit requirement at the place where the bearing is installed. If the finish at this place is too poor, the dimensional accuracy requirement cannot be met. The material without quenching is relatively soft, and it is difficult to get a high finish on the surface of the shaft when

Bearing steel, also known as high-carbon chromium steel, carbon content Wc is about 1%, chromium content Wcr is 0.5% -1.65%. Bearing steel is divided into high carbon chromium bearing steel, chromium-free bearing steel, carburizing bearing steel, stainless steel, high temperature bearing steel and a

Deep groove ball bearings and angular contact ball bearings are typical rolling bearings, which are widely used to withstand radial load and bidirectional axial load, suitable for high-speed rotation and occasions requiring low noise and low vibration. Sealed bearings with steel dust cover or rubber

The company adequate inventory, delivery cycle is short, all bearings are high precision, low noise, long life, one year warranty. The use of eight core, strictly control product quality, inexpensive, welcome to inquire at any time!

The identification card is the ID card of each process in the drawings in the bearing processing process, which tracks the flow of the process, and the quality inspection department is responsible for marking the process flow, specific time, process accuracy, standards, requirements and so on. Stric

All kinds of measuring tools of our company are sent for inspection regularly, and the special person is responsible for sorting out and accepting them, so as to ensure the accuracy of each measuring tool and the quality of each bearing! Quality is always our first pursuit! Welcome friends at home a

Heat treatment, scientific process, standardized management, all products have undergone cold treatment at -30°C-70°C (quenchingTest piece) material internal structure inspection.

7096AC, ID 480mm, OD 700mm, Height 100mm, Live Load 702KN, Static Load1530KN, Grease Lubricated 630r/min, Oil Lubricated 850r/min, Weight 125kg.

d: 260 D:360 B: 46