Luoyang Aoju Bearing Technology Co., Ltd. is a limited liability company specializing in the production of medium and large angular contact ball bearings, mainly engaged in double row angular contact bearings, thin wall angular contact bearings, angular contact bearings, non-standard angular contact

Bearings use a relatively simple structure: balls with inner and outer smooth metal surfaces to help roll. The ball itself carries the weight of the load - the force of the weight of the load is what drives the rotation of the bearing.However, not all loads force the bearing in the same way. There a

Brute force is used during installation, and direct hammering of the bearing with a hammer will cause the greatest damage to the bearing; Is the main cause of deformation. 2. The installation is not in place, the installation is deviated or not installed to the bearing position, resulting in too sm

We all know that bearings are a very common tool in the industrial field. So do you know the early bearing forms? The early form of linear motion bearings was to place a row of wooden poles under a row of pry plates. Modern linear motion bearings use the same working principle, sometimes with balls

Double row angular contact ball bearings can withstand radial and axial loads acting in both directions. It can limit the axial displacement of the shaft or housing in both directions. The contact angle is 30 or 35 degrees. It can provide a high stiffness bearing structure and can withstand overturn

What role does the bearing have？

Double row angular contact ball bearing is also a common product, which has a wide range of applications. However, some manufacturers do not know much about this product they use, so I will tell you about the characteristics and uses of double row angular contact bearings. If you want to know, let's

About Angular Contact Ball Bearing1. There is a contact angle between the ring and the ball, and the standard contact angles are 15,30 and 40;2. The larger the contact Angle, the greater the axial load capacity;3. The smaller the contact Angle, the more conducive to high-speed rotation;4. Single-col

The function of the bearing is to play a supporting role. If the transmission part (such as: shaft) is directly matched with the hole, the transmission resistance will be large, and the transmission part will not be easy to replace after the wear is large, and the bearing relies on the rolling conta