Slewing bearing is a kind of large bearing which can bear comprehensive load, and can bear large axial and radial load and overturning moment at the same time. Slewing bearing is generally equipped with mounting holes, inner or outer gears, lubricating oil holes and sealing devices, which can make t

Deep Groove Ball Bearing:Deep groove ball bearing is the most common type of rolling bearings. Mainly bear the radial load, can also withstand both the radial load and the axial load. When it bears only the radial loads, the contact angle is zero.Angular Contact Ball Bearing:There are contact Angle

The working principle of bearings is rolling friction instead of sliding friction; 2, because a variety of machinery has different working conditions, a variety of different requirements are put forward for rolling bearings in load capacity, structure and performance, therefore, rolling bearings ne

Tip 1, the use of copper rod and manual hammer installationThis is a simple way to install small and medium-sized bearings. When the inner ring of the bearing is a tight fit and the outer ring is a loose fit, the copper rod is pressed close to the end face of the inner ring of the bearing, and the c

1. Forge linkThe forging link is an important link to ensure the reliability and life of the bearing. After the raw materials are forged, the bearing ring blank is formed. At the same time, the organization structure of raw materials becomes more dense and more linear, which can improve the reliabil

In the long-term production status monitoring, we found that the double-column angle contact ball bearing showed strong regularity during its use, and had very good repeatability. When the normal high-quality bearings are used, the vibration and noise are relatively small, but the spectrum is scatte

A bearing is a "part that helps an object rotate". As the name suggests, a bearing is a part that supports a "shaft" that rotates in a machine.Machines that use bearings include automobiles, airplanes, generators, and more. Household appliances such as refrigerators, vacuum cleaners, and air conditi

Luoyang Aoju Bearing Technology Co., Ltd. is a limited liability company specializing in the production of medium and large angular contact ball bearings, mainly engaged in double row angular contact bearings, thin wall angular contact bearings, angular contact bearings, non-standard angular contact

Brute force is used during installation, and direct hammering of the bearing with a hammer will cause the greatest damage to the bearing; Is the main cause of deformation. 2. The installation is not in place, the installation is deviated or not installed to the bearing position, resulting in too sm