Views: 13 Author: Site Editor Publish Time: 2022-08-09 Origin: Site
Assembly process
1: Before assembly, clean the inner and outer rings of the bearing to demagnetize, steel balls and cages.
2: Deal with the appearance of the inner and outer rings of the bearing, the appearance of steel balls, scratches, etc., and the defects of the cage.
3: Check the size of the inner and outer rings at a constant temperature, and check the bearing clearance before matching.
4: Paired bearings: Check that the inner diameter is 0.005 different from each other, the outer diameter is 0.005 different from each other, the P4-level clearance is 0.03 and the P2-level clearance is 0.02.
5: Assemble after pairing, such as: DB, DT, DF, TBT, QBC, etc., draw the corner line.
7: Typing, cleaning bearings, packaging.
